SunOS man pages : pmadm (1)
Maintenance Commands pmadm(1M)
NAME
pmadm - port monitor administration
SYNOPSIS
pmadm -a [ -p pmtag | -t type ] -s svctag -i id -
m pmspecific -v ver [ -f xu ] [ -y comment ] [ -z
script ]
pmadm -r -p pmtag -s svctag
pmadm -e -p pmtag -s svctag
pmadm -d -p pmtag -s svctag
pmadm -l [ -t type | -p pmtag ] [ -s svctag ]
pmadm -L [ -t type | -p pmtag ] [ -s svctag ]
pmadm -g -p pmtag -s svctag [ -z script ]
pmadm -g -s svctag -t type -z script
DESCRIPTION
pmadm is the administrative command for the lower level of
the Service Access Facility hierarchy, that is, for service
administration. A port may have only one service associated
with it although the same service may be available through
more than one port. In order to uniquely identify an
instance of a service, the pmadm command must identify both
the port monitor or port monitors through which the service
is available (-p or -t) and the service (-s). See OPTIONS.
pmadm performs the following functions:
o adds or removes a service
o enables or disables a service
o installs or replaces a per-service configuration
script
o prints requested service information
Any user on the system may invoke pmadm to request service
status (-l or -L) or to print per-service configuration
scripts (-g without the -z option). pmadm with other options
may be executed only by a privileged user.
OPTIONS
The following options are supported:
-a Add a service. pmadm adds an entry for the new
SunOS 5.8 Last change: 10 Nov 1998 1
Maintenance Commands pmadm(1M)
service to the port monitor's administrative
file. Because of the complexity of the options
and arguments that follow the -a option, it may
be convenient to use a command script or the menu
system to add services.
-d Disable a service. Add x to the flag field in the
entry for the service svctag in the port
monitor's administrative file. This is the entry
used by port monitor pmtag. See the -f option,
below, for a description of the flags available.
-e Enable a service. Remove x from the flag field in
the entry for the service svctag in the port mon-
itor administrative file. This is the entry used
by port monitor pmtag. See the -f option, below,
for a description of the flags available.
-f xu The -f option specifies one or both of the fol-
lowing two flags which are then included in the
flag field of the entry for the new service in
the port monitor's administrative file. If the -f
option is not included, no flags are set and the
default conditions prevail. By default, a new
service is enabled and no utmpx entry is created
for it. An -f option without a following argument
is illegal.
x Do not enable the service svctag available
through port monitor pmtag.
u Create a utmpx entry for service svctag
available through port monitor pmtag.
-g Print, install, or replace a per-service confi-
guration script. The -g option with a -p option
and a -s option prints the per-service configura-
tion script for service svctag available through
port monitor pmtag. The -g option with a -p
option, a -s option, and a -z option installs the
per-service configuration script contained in the
file script as the per-service configuration
script for service svctag available through port
monitor pmtag. The -g option with a - s option, a
-t option, and a -z option installs the file
script as the per-service configuration script
for service svctag available through any port
monitor of type type. Other combinations of
options with -g are invalid.
-i id id is the identity that is to be assigned to
SunOS 5.8 Last change: 10 Nov 1998 2
Maintenance Commands pmadm(1M)
service svctag when it is started. id must be an
entry in /etc/passwd.
-l The -l option requests service information. Used
by itself and with the options described below,
it provides a filter for extracting information
in several different groupings.
-l By itself, the -l option lists all services on
the system.
-l -p pmtag
Lists all services available through port monitor
pmtag.
-l -s svctag
Lists all services with tag svctag.
-l -p pmtag-ssvctag
Lists service svctag.
-l -t type
Lists all services available through port moni-
tors of type type.
-l -t type-ssvctag
Lists all services with tag svctag available
through a port monitor of type type.
Other combinations of options with -l are invalid.
-L The -L option is identical to the -l option except
that output is printed in a condensed format.
-m pmspecific
pmspecific is the port monitor-specific portion of the
port monitor administrative file entry for the ser-
vice.
-p pmtag
Specifies the tag associated with the port monitor
through which a service (specified as -s svctag) is
available.
-r Remove a service. When pmadm removes a service, the
entry for the service is removed from the port
monitor's administrative file.
-s svctag
Specifies the service tag associated with a given ser-
vice. The service tag is assigned by the system
SunOS 5.8 Last change: 10 Nov 1998 3
Maintenance Commands pmadm(1M)
administrator and is part of the entry for the service
in the port monitor's administrative file.
-t type
Specifies the the port monitor type.
-v ver
Specifies the version number of the port monitor
administrative file. The version number may be given
as
-v 'pmspec -V`
where pmspec is the special administrative command for
port monitor pmtag. This special command is ttyadm for
ttymon and nlsadmin for listen. The version stamp of
the port monitor is known by the command and is
returned when pmspec is invoked with a -V option.
-y comment
Associate comment with the service entry in the port
monitor administrative file.
-z script
Used with the -g option to specify the name of the
file that contains the per-service configuration
script. Modifying a configuration script is a three-
step procedure. First a copy of the existing script is
made (-g alone). Then the copy is edited. Finally, the
copy is put in place over the existing script (-g with
-z).
Options that request information write the requested infor-
mation to the standard output. A request for information
using the -l option prints column headers and aligns the
information under the appropriate headings. In this format,
a missing field is indicated by a hyphen. A request for
information in the condensed format using the -L option
prints the information in colon-separated fields; missing
fields are indicated by two successive colons. # is the com-
ment character.
EXAMPLES
Example 1: Using the pmadmCommand
Add a service to a port monitor with tag pmtag. Give the
service the tag svctag. Port monitor-specific information is
generated by specpm. The service defined by svctag will be
invoked with identity root.
SunOS 5.8 Last change: 10 Nov 1998 4
Maintenance Commands pmadm(1M)
pmadm -a -p pmtag -s svctag -i root -m `specpm -a arg1 -b arg2`-v `specpm -V`
Add a service with service tag svctag, identity guest, and
port monitor-specific information generated by specpm to all
port monitors of type type:
pmadm -a -s svctag -i guest -t type -m `specpm -a arg1 -b arg2`-v `specpm -V`
Remove the service svctag from port monitor pmtag:
pmadm -r -p pmtag -s svctag
Enable the service svctag available through port monitor
pmtag:
pmadm -e -p pmtag -s svctag
Disable the service svctag available through port monitor
pmtag:
pmadm -d -p pmtag -s svctag
List status information for all services:
pmadm -l
List status information for all services available through
the port monitor with tag ports:
pmadm -l -p ports
List the same information in condensed format:
pmadm -L -p ports
List status information for all services available through
port monitors of type listen:
pmadm -l -t listen
Print the per-service configuration script associated with
the service svctag available through port monitor pmtag:
pmadm -g -p pmtag -s svctag
EXIT STATUS
The following exit values are returned:
0 Successful operation.
>0 Operation failed.
SunOS 5.8 Last change: 10 Nov 1998 5
Maintenance Commands pmadm(1M)
FILES
/etc/saf/pmtag/_config
/etc/saf/pmtag/svctag
/var/saf/pmtag/*
ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWcsu |
|_____________________________|_____________________________|
SEE ALSO
sac(1M), sacadm(1M), doconfig(3NSL), attributes(5)
SunOS 5.8 Last change: 10 Nov 1998 6
|
 |
|
|
