Mac OS X / Darwin man pages : ps (1)
ps (1)
Table of Contents
ps - process status
ps [-aCcefhjlMmrSTuvwx] [-O fmt] [-o fmt] [-p pid] [-t tty] [-U username]
ps [-L]
Ps displays a header line followed by lines containing information about
your processes that have controlling terminals. This information is
sorted by controlling terminal, then by process ID.
The information displayed is selected based on a set of keywords (see the
-L -O and -o options). The default output format includes, for each process,
the process' ID, controlling terminal, cpu time (including both
user and system time), state, and associated command.
The process file system (see procfs(5)
) should be mounted when ps is
executed, otherwise not all information will be available.
The options are as follows:
- -a
- Display information about other users' processes as well as your
own.
- -c
- Change the ``command'' column output to just contain the executable
name, rather than the full command line.
- -C
- Change the way the cpu percentage is calculated by using a
``raw'' cpu calculation that ignores ``resident'' time (this normally
has no effect).
- -e
- Display the environment as well.
- -f
- Show commandline and environment information about swapped out
processes. This option is honored only if the uid of the user is
0.
- -h
- Repeat the information header as often as necessary to guarantee
one header per page of information.
- -j
- Print information associated with the following keywords: user,
pid, ppid, pgid, sess, jobc, state, tt, time and command.
- -L
- List the set of available keywords.
- -l
- Display information associated with the following keywords: uid,
pid, ppid, cpu, pri, nice, vsz, rss, wchan, state, tt, time and
command.
- -M
- Print the threads corresponding to each task.
- -m
- Sort by memory usage, instead of by process ID.
- -O
- Add the information associated with the space or comma separated
list of keywords specified, after the process ID, in the default
information display. Keywords may be appended with an equals
(``='') sign and a string. This causes the printed header to use
the specified string instead of the standard header.
- -o
- Display information associated with the space or comma separated
list of keywords specified. Keywords may be appended with an
equals (``='') sign and a string. This causes the printed header
to use the specified string instead of the standard header.
- -p
- Display information associated with the specified process ID.
- -r
- Sort by current cpu usage, instead of by process ID.
- -S
- Change the way the process time is calculated by summing all
exited children to their parent process.
- -T
- Display information about processes attached to the device associated
with the standard input.
- -t
- Display information about processes attached to the specified
terminal device.
- -U
- Display the processes belonging to the specified username.
- -u
- Display information associated with the following keywords: user,
pid, %cpu, %mem, vsz, rss, tt, state, start, time and command.
The -u option implies the -r option.
- -v
- Display information associated with the following keywords: pid,
state, time, sl, re, pagein, vsz, rss, lim, tsiz, %cpu, %mem and
command. The -v option implies the -m option.
- -w
- Use 132 columns to display information, instead of the default
which is your window size. If the -w option is specified more
than once, ps will use as many columns as necessary without
regard for your window size.
- -x
- Display information about processes without controlling terminals.
A complete list of the available keywords are listed below. Some of
these keywords are further specified as follows:
- %cpu
- The cpu utilization of the process; this is a decaying average
over up to a minute of previous (real) time. Since the time base
over which this is computed varies (since processes may be very
young) it is possible for the sum of all %CPU fields to exceed
100%.
- %mem
- The percentage of real memory used by this process.
- flags
- The flags associated with the process as in the include file
<sys/proc.h>:
- P_ADVLOCK
- 0x00001 Process may hold a POSIX advisory
lock
- P_CONTROLT
- 0x00002 Has a controlling terminal
- P_INMEM
- 0x00004 Loaded into memory
P_NOCLDSTOP 0x00008 No SIGCHLD when children stop
- P_PPWAIT
- 0x00010 Parent is waiting for child to
exec/exit
- P_PROFIL
- 0x00020 Has started profiling
- P_SELECT
- 0x00040 Selecting; wakeup/waiting danger
- P_SINTR
- 0x00080 Sleep is interruptible
- P_SUGID
- 0x00100 Had set id privileges since last
exec
- P_SYSTEM
- 0x00200 System proc: no sigs, stats or
swapping
- P_TIMEOUT
- 0x00400 Timing out during sleep
- P_TRACED
- 0x00800 Debugged process being traced
- P_WAITED
- 0x01000 Debugging process has waited for
child
- P_WEXIT
- 0x02000 Working on exiting
- P_EXEC
- 0x04000 Process called exec
- P_NOSWAP
- 0x08000 Another flag to prevent swap out
- P_PHYSIO
- 0x10000 Doing physical I/O
- P_OWEUPC
- 0x20000 Owe process an addupc() call at
next ast
- P_SWAPPING
- 0x40000 Process is being swapped
- lim
- The soft limit on memory used, specified via a call to
setrlimit(2)
.
lstart The exact time the command started, using the ``%c'' format
described in strftime(3)
.
- nice
- The process scheduling increment (see setpriority(2)
).
- rss
- the real memory (resident set) size of the process (in 1024 byte
units).
start The time the command started. If the command started less than
24 hours ago, the start time is displayed using the ``%l:ps.1p''
format described in strftime(3)
. If the command started less
than 7 days ago, the start time is displayed using the
``%a6.15p'' format. Otherwise, the start time is displayed using
the ``%e%b%y'' format.
- state
- The state is given by a sequence of letters, for example,
``RWNA''. The first letter indicates the run state of the process:
- D
- Marks a process in disk (or other short term, uninterruptible)
wait.
- I
- Marks a process that is idle (sleeping for longer than
about 20 seconds).
- R
- Marks a runnable process.
- S
- Marks a process that is sleeping for less than about 20
seconds.
- T
- Marks a stopped process.
- Z
- Marks a dead process (a ``zombie'').
Additional characters after these, if any, indicate additional
state information:
- +
- The process is in the foreground process group of its
control terminal.
- <
- The process has raised CPU scheduling priority.
- >
- The process has specified a soft limit on memory requirements
and is currently exceeding that limit; such a process
is (necessarily) not swapped.
- A
- the process has asked for random page replacement
(VA_ANOM, from vadvise(2)
, for example, lisp(1)
in a
garbage collect).
- E
- The process is trying to exit.
- L
- The process has pages locked in core (for example, for
raw I/O).
- N
- The process has reduced CPU scheduling priority (see
setpriority(2)
).
- S
- The process has asked for FIFO page replacement (VA_SEQL,
from vadvise(2)
, for example, a large image processing
program using virtual memory to sequentially address
voluminous data).
- s
- The process is a session leader.
- V
- The process is suspended during a vfork.
- W
- The process is swapped out.
- X
- The process is being traced or debugged.
- tt
- An abbreviation for the pathname of the controlling terminal, if
any. The abbreviation consists of the three letters following
/dev/tty, or, for the console, ``con''. This is followed by a
``-'' if the process can no longer reach that controlling terminal
(i.e., it has been revoked).
- wchan
- The event (an address in the system) on which a process waits.
When printed numerically, the initial part of the address is
trimmed off and the result is printed in hex, for example,
0x80324000 prints as 324000.
When printing using the command keyword, a process that has exited and
has a parent that has not yet waited for the process (in other words, a
zombie) is listed as ``<defunct>'', and a process which is blocked while
trying to exit is listed as ``<exiting>''. Ps makes an educated guess as
to the file name and arguments given when the process was created by
examining memory or the swap area. The method is inherently somewhat
unreliable and in any event a process is entitled to destroy this information,
so the names cannot be depended on too much. The ucomm (accounting)
keyword can, however, be depended on.
The following is a complete list of the available keywords and their
meanings. Several of them have aliases (keywords which are synonyms).
- %cpu
- percentage cpu usage (alias pcpu)
- %mem
- percentage memory usage (alias pmem)
- acflag
- accounting flag (alias acflg)
- command
- command and arguments
- cpu
- short-term cpu usage factor (for scheduling)
- flags
- the process flags, in hexadecimal (alias f)
- gid
- the effective gid
- inblk
- total blocks read (alias inblock)
- jobc
- job control count
- ktrace
- tracing flags
- ktracep
- tracing vnode
- lim
- memoryuse limit
- logname
- login name of user who started the process
- lstart
- time started
- majflt
- total page faults
- minflt
- total page reclaims
- msgrcv
- total messages received (reads from pipes/sockets)
- msgsnd
- total messages sent (writes on pipes/sockets)
- nice
- nice value (alias ni)
- nivcsw
- total involuntary context switches
- nsigs
- total signals taken (alias nsignals)
- nswap
- total swaps in/out
- nvcsw
- total voluntary context switches
- nwchan
- wait channel (as an address)
- oublk
- total blocks written (alias oublock)
- p_ru
- resource usage (valid only for zombie)
- paddr
- swap address
- pagein
- pageins (same as majflt)
- pgid
- process group number
- pid
- process ID
- poip
- pageouts in progress
- ppid
- parent process ID
- pri
- scheduling priority
- re
- core residency time (in seconds; 127 = infinity)
- rgid
- real group ID
- rlink
- reverse link on run queue, or 0
- rss
- resident set size
- rsz
- resident set size + (text size / text use count) (alias
rssize)
- rtprio
- realtime priority (101 = not a realtime process)
- ruid
- real user ID
- ruser
- user name (from ruid)
- sess
- session pointer
- sig
- pending signals (alias pending)
- sigcatch
- caught signals (alias caught)
sigignore ignored signals (alias ignored)
- sigmask
- blocked signals (alias blocked)
- sl
- sleep time (in seconds; 127 = infinity)
- start
- time started
- state
- symbolic process state (alias stat)
- svgid
- saved gid from a setgid executable
- svuid
- saved uid from a setuid executable
- tdev
- control terminal device number
- time
- accumulated cpu time, user + system (alias cputime)
- tpgid
- control terminal process group ID
- tsess
- control terminal session pointer
- tsiz
- text size (in Kbytes)
- tt
- control terminal name (two letter abbreviation)
- tty
- full name of control terminal
- uprocp
- process pointer
- ucomm
- name to be used for accounting
- uid
- effective user ID
- upr
- scheduling priority on return from system call (alias usrpri)
- user
- user name (from uid)
- vsz
- virtual size in Kbytes (alias vsize)
- wchan
- wait channel (as a symbolic name)
- xstat
- exit or stop status (valid only for stopped or zombie process)
- /dev
- special files and device names
- /var/run/dev.db
- /dev name database
/var/db/kvm_kernel.db system namelist database
- /proc
- the mount point of procfs(5)
kill(1)
, w(1)
, kvm(3)
, strftime(3)
, procfs(5)
, pstat(8)
Since ps cannot run faster than the system and is run as any other scheduled
process, the information it displays can never be exact.
Table of Contents
|
 |
|
|
