- online man pages   

Linux man pages : ip (7)
IP(7)			   Linux Programmer's Manual			 IP(7)


ip - Linux IPv4 protocol implementation


#include <sys/socket.h> #include <netinet/in.h> tcp_socket = socket(PF_INET, SOCK_STREAM, 0); raw_socket = socket(PF_INET, SOCK_RAW, protocol); udp_socket = socket(PF_INET, SOCK_DGRAM, protocol);


Linux implements the Internet Protocol, version 4, described in RFC791 and RFC1122. ip contains a level 2 multicasting implementation con- forming to RFC1112. It also contains an IP router including a packet filter. The programmer's interface is BSD sockets compatible. For more infor- mation on sockets, see socket(7). An IP socket is created by calling the socket(2) function as socket(PF_INET, socket_type, protocol). Valid socket types are SOCK_STREAM to open a tcp(7) socket, SOCK_DGRAM to open a udp(7) socket, or SOCK_RAW to open a raw(7) socket to access the IP protocol directly. protocol is the IP protocol in the IP header to be received or sent. The only valid values for protocol are 0 and IPPROTO_TCP for TCP sockets and 0 and IPPROTO_UDP for UDP sockets. For SOCK_RAW you may specify a valid IANA IP protocol defined in RFC1700 assigned num- bers. When a process wants to receive new incoming packets or connections, it should bind a socket to a local interface address using bind(2). Only one IP socket may be bound to any given local (address, port) pair. When INADDR_ANY is specified in the bind call the socket will be bound to all local interfaces. When listen(2) or connect(2) are called on a unbound socket the socket is automatically bound to a random free port with the local address set to INADDR_ANY. A TCP local socket address that has been bound is unavailable for some time after closing, unless the SO_REUSEADDR flag has been set. Care should be taken when using this flag as it makes TCP less reliable.


An IP socket address is defined as a combination of an IP interface address and a port number. The basic IP protocol does not supply port numbers, they are implemented by higher level protocols like udp(7) and tcp(7). On raw sockets sin_port is set to the IP protocol. struct sockaddr_in { sa_family_t sin_family; /* address family: AF_INET */ u_int16_t sin_port; /* port in network byte order */ struct in_addr sin_addr; /* internet address */ }; /* Internet address. */ struct in_addr { u_int32_t s_addr; /* address in network byte order */ }; sin_family is always set to AF_INET. This is required; in Linux 2.2 most networking functions return EINVAL when this setting is missing. sin_port contains the port in network byte order. The port numbers below 1024 are called reserved ports. Only processes with effective user id 0 or the CAP_NET_BIND_SERVICE capability may bind(2) to these sockets. Note that the raw IPv4 protocol as such has no concept of a port, they are only implemented by higher protocols like tcp(7) and udp(7). sin_addr is the IP host address. The addr member of struct in_addr contains the host interface address in network order. in_addr should be only accessed using the inet_aton(3), inet_addr(3), inet_makeaddr(3) library functions or directly with the name resolver (see gethostbyname(3) ). IPv4 addresses are divided into unicast, broadcast and mul- ticast addresses. Unicast addresses specify a single interface of a host, broadcast addresses specify all hosts on a network and multicast addresses address all hosts in a multicast group. Datagrams to broad- cast addresses can be only sent or received when the SO_BROADCAST socket flag is set. In the current implementation connection oriented sockets are only allowed to use unicast addresses. Note that the address and the port are always stored in network order. In particular, this means that you need to call htons(3) on the number that is assigned to a port. All address/port manipulation functions in the standard library work in network order. There are several special addresses: INADDR_LOOPBACK ( always refers to the local host via the loopback device; INADDR_ANY ( means any address for binding; INADDR_BROADCAST ( means any host and has the same effect on bind as INADDR_ANY for historical reasons.


IP supports some protocol specific socket options that can be set with setsockopt(2) and read with getsockopt(2). The socket option level for IP is SOL_IP. A boolean integer flag is zero when it is false, other- wise true. IP_OPTIONS Sets or get the IP options to be sent with every packet from this socket. The arguments are a pointer to a memory buffer containing the options and the option length. The setsockopt(2) call sets the IP options associated with a socket. The maximum option size for IPv4 is 40 bytes. See RFC791 for the allowed options. When the initial connection request packet for a SOCK_STREAM socket contains IP options, the IP options will be set automatically to the options from the initial packet with routing headers reversed. Incoming packets are not allowed to change options after the connection is established. The pro- cessing of all incoming source routing options is disabled by default and can be enabled by using the accept_source_route sysctl. Other options like timestamps are still handled. For datagram sockets, IP options can be only set by the local user. Calling getsockopt(2) with IP_OPTIONS puts the current IP options used for sending into the supplied buffer. IP_PKTINFO Pass an IP_PKTINFO ancillary message that contains a pktinfo structure that supplies some information about the incoming packet. This only works for datagram oriented sockets. The argument is a flag that tells the socket whether the IP_PKTINFO message should be passed or not. The message itself can only be sent/retrieved as control message with a packet using recvmsg(2) or sendmsg(2). struct in_pktinfo { unsigned int ipi_ifindex; /* Interface index */ struct in_addr ipi_spec_dst; /* Local address */ struct in_addr ipi_addr; /* Header Destination address */ }; ipi_ifindex is the unique index of the interface the packet was received on. ipi_spec_dst is the local address of the packet and ipi_addr is the destination address in the packet header. If IP_PKTINFO is passed to sendmsg(2) then the outgoing packet will be sent over the interface specified in ipi_ifindex with the destination address set to ipi_spec_dst IP_RECVTOS If enabled the IP_TOS ancillary message is passed with incoming packets. It contains a byte which specifies the Type of Ser- vice/Precedence field of the packet header. Expects a boolean integer flag. IP_RECVTTL When this flag is set pass a IP_RECVTTL control message with the time to live field of the received packet as a byte. Not sup- ported for SOCK_STREAM sockets. IP_RECVOPTS Pass all incoming IP options to the user in a IP_OPTIONS control message. The routing header and other options are already filled in for the local host. Not supported for SOCK_STREAM sockets. IP_RETOPTS Identical to IP_RECVOPTS but returns raw unprocessed options with timestamp and route record options not filled in for this hop. IP_TOS Set or receive the Type-Of-Service (TOS) field that is sent with every IP packet originating from this socket. It is used to pri- oritize packets on the network. TOS is a byte. There are some standard TOS flags defined: IPTOS_LOWDELAY to minimize delays for interactive traffic, IPTOS_THROUGHPUT to optimize through- put, IPTOS_RELIABILITY to optimize for reliability, IPTOS_MIN- COST should be used for "filler data" where slow transmission doesn't matter. At most one of these TOS values can be speci- fied. Other bits are invalid and shall be cleared. Linux sends IPTOS_LOWDELAY datagrams first by default, but the exact behaviour depends on the configured queueing discipline. Some high priority levels may require an effective user id of 0 or the CAP_NET_ADMIN capability. The priority can also be set in a protocol independent way by the ( SOL_SOCKET, SO_PRIORITY ) socket option (see socket(7) ). IP_TTL Set or retrieve the current time to live field that is send in every packet send from this socket. IP_HDRINCL If enabled the user supplies an ip header in front of the user data. Only valid for SOCK_RAW sockets. See raw(7) for more information. When this flag is enabled the values set by IP_OPTIONS, IP_TTL and IP_TOS are ignored. IP_RECVERR (defined in <linux/errqueue.h>) Enable extended reliable error message passing. When enabled on a datagram socket all generated errors will be queued in a per- socket error queue. When the user receives an error from a socket operation the errors can be received by calling recvmsg(2) with the MSG_ERRQUEUE flag set. The sock_extended_err structure describing the error will be passed in a ancillary message with the type IP_RECVERR and the level SOL_IP. This is useful for reliable error handling on unconnected sockets. The received data portion of the error queue contains the error packet. The IP_RECVERR control message contains a sock_extended_err structure: #define SO_EE_ORIGIN_NONE 0 #define SO_EE_ORIGIN_LOCAL 1 #define SO_EE_ORIGIN_ICMP 2 #define SO_EE_ORIGIN_ICMP6 3 struct sock_extended_err { u_int32_t ee_errno; /* error number */ u_int8_t ee_origin; /* where the error originated */ u_int8_t ee_type; /* type */ u_int8_t ee_code; /* code */ u_int8_t ee_pad; u_int32_t ee_info; /* additional information */ u_int32_t ee_data; /* other data */ /* More data may follow */ }; struct sockaddr *SO_EE_OFFENDER(struct sock_extended_err *); ee_errno contains the errno number of the queued error. ee_ori- gin is the origin code of where the error originated. The other fields are protocol specific. The macro SO_EE_OFFENDER returns a pointer to the address of the network object where the error originated from given a pointer to the ancillary message. If this address is not known, the sa_family member of the sockaddr contains AF_UNSPEC and the other fields of the sockaddr are undefined. IP uses the sock_extended_err structure as follows: ee_origin is set to SO_EE_ORIGIN_ICMP for errors received as an ICMP packet, or SO_EE_ORIGIN_LOCAL for locally generated errors. Unknown val- ues should be ignored. ee_type and ee_code are set from the type and code fields of the ICMP header. ee_info contains the discovered MTU for EMSGSIZE errors. The message also contains the sockaddr_in of the node caused the error, which can be accessed with the SO_EE_OFFENDER macro. The sin_family field of the SO_EE_OFFENDER address is AF_UNSPEC when the source was unknown. When the error originated from the network, all IP options (IP_OPTIONS, IP_TTL, etc.) enabled on the socket and contained in the error packet are passed as control messages. The payload of the packet causing the error is returned as nor- mal payload. Note that TCP has no error queue; MSG_ERRQUEUE is illegal on SOCK_STREAM sockets. Thus all errors are returned by socket function return or SO_ERROR only. For raw sockets, IP_RECVERR enables passing of all received ICMP errors to the application, otherwise errors are only reported on connected sockets It sets or retrieves an integer boolean flag. IP_RECVERR defaults to off. IP_PMTU_DISCOVER Sets or receives the Path MTU Discovery setting for a socket. When enabled, Linux will perform Path MTU Discovery as defined in RFC1191 on this socket. The don't fragment flag is set on all outgoing datagrams. The system-wide default is controlled by the ip_no_pmtu_disc sysctl for SOCK_STREAM sockets, and disabled on all others. For non SOCK_STREAM sockets it is the user's responsibility to packetize the data in MTU sized chunks and to do the retransmits if necessary. The kernel will reject packets that are bigger than the known path MTU if this flag is set (with EMSGSIZE ). Path MTU discovery flags Meaning IP_PMTUDISC_WANT Use per-route settings. IP_PMTUDISC_DONT Never do Path MTU Discovery. IP_PMTUDISC_DO Always do Path MTU Discovery. When PMTU discovery is enabled the kernel automatically keeps track of the path MTU per destination host. When it is con- nected to a specific peer with connect(2) the currently known path MTU can be retrieved conveniently using the IP_MTU socket option (e.g. after a EMSGSIZE error occurred). It may change over time. For connectionless sockets with many destinations the new also MTU for a given destination can also be accessed using the error queue (see IP_RECVERR). A new error will be queued for every incoming MTU update. While MTU discovery is in progress initial packets from datagram sockets may be dropped. Applications using UDP should be aware of this and not take it into account for their packet retransmit strategy. To bootstrap the path MTU discovery process on unconnected sock- ets it is possible to start with a big datagram size (up to 64K- headers bytes long) and let it shrink by updates of the path MTU. To get an initial estimate of the path MTU connect a datagram socket to the destination address using connect(2) and retrieve the MTU by calling getsockopt(2) with the IP_MTU option. IP_MTU Retrieve the current known path MTU of the current socket. Only valid when the socket has been connected. Returns an integer. Only valid as a getsockopt(2). IP_ROUTER_ALERT Pass all to-be forwarded packets with the IP Router Alert option set to this socket. Only valid for raw sockets. This is useful, for instance, for user space RSVP daemons. The tapped packets are not forwarded by the kernel, it is the users responsibility to send them out again. Socket binding is ignored, such packets are only filtered by protocol. Expects an integer flag. IP_MULTICAST_TTL Set or reads the time-to-live value of outgoing multicast pack- ets for this socket. It is very important for multicast packets to set the smallest TTL possible. The default is 1 which means that multicast packets don't leave the local network unless the user program explicitly requests it. Argument is an integer. IP_MULTICAST_LOOP Sets or reads a boolean integer argument whether sent multicast packets should be looped back to the local sockets. IP_ADD_MEMBERSHIP Join a multicast group. Argument is a struct ip_mreqn structure. struct ip_mreqn { struct in_addr imr_multiaddr; /* IP multicast group address */ struct in_addr imr_address; /* IP address of local interface */ int imr_ifindex; /* interface index */ }; imr_multiaddr contains the address of the multicast group the application wants to join or leave. It must be a valid multi- cast address. imr_address is the address of the local interface with which the system should join the multicast group; if it is equal to INADDR_ANY an appropriate interface is chosen by the system. imr_ifindex is the interface index of the interface that should join/leave the imr_multiaddr group, or 0 to indicate any interface. For compatibility, the old ip_mreq structure is still supported. It differs from ip_mreqn only by not including the imr_ifindex field. Only valid as a setsockopt(2). IP_DROP_MEMBERSHIP Leave a multicast group. Argument is an ip_mreqn or ip_mreq structure similar to IP_ADD_MEMBERSHIP. IP_MULTICAST_IF Set the local device for a multicast socket. Argument is an ip_mreqn or ip_mreq structure similar to IP_ADD_MEMBERSHIP. When an invalid socket option is passed, ENOPROTOOPT is returned.


The IP protocol supports the sysctl interface to configure some global options. The sysctls can be accessed by reading or writing the /proc/sys/net/ipv4/* files or using the sysctl(2) interface. ip_default_ttl Set the default time-to-live value of outgoing packets. This can be changed per socket with the IP_TTL option. ip_forward Enable IP forwarding with a boolean flag. IP forwarding can be also set on a per interface basis. ip_dynaddr Enable dynamic socket address and masquerading entry rewriting on interface address change. This is useful for dialup interface with changing IP addresses. 0 means no rewriting, 1 turns it on and 2 enables verbose mode. ip_autoconfig Not documented. ip_local_port_range Contains two integers that define the default local port range allocated to sockets. Allocation starts with the first number and ends with the second number. Note that these should not conflict with the ports used by masquerading (although the case is handled). Also arbitary choices may cause problems with some firewall packet filters that make assumptions about the local ports in use. First number should be at least >1024, better >4096 to avoid clashes with well known ports and to minimize firewall problems. ip_no_pmtu_disc If enabled, don't do Path MTU Discovery for TCP sockets by default. Path MTU discovery may fail if misconfigured firewalls (that drop all ICMP packets) or misconfigured interfaces (e.g., a point-to-point link where the both ends don't agree on the MTU) are on the path. It is better to fix the broken routers on the path than to turn off Path MTU Discovery globally, because not doing it incurs a high cost to the network. ipfrag_high_thresh, ipfrag_low_thresh If the amount of queued IP fragments reaches ipfrag_high_thresh , the queue is pruned down to ipfrag_low_thresh . Contains an integer with the number of bytes. ip_always_defrag [New with Kernel 2.2.13; in earlier kernel version the feature was controlled at compile time by the CONFIG_IP_ALWAYS_DEFRAG option] When this boolean frag is enabled (not equal 0) incoming frag- ments (parts of IP packets that arose when some host between origin and destination decided that the packets were too large and cut them into pieces) will be reassembled (defragmented) before being processed, even if they are about to be forwarded. Only enable if running either a firewall that is the sole link to your network or a transparent proxy; never ever turn on here for a normal router or host. Otherwise fragmented communication may me disturbed when the fragments would travel over different links. Defragmentation also has a large memory and CPU time cost. This is automagically turned on when masquerading or transparent proxying are configured. neigh/* See arp(7).


All ioctls described in socket(7) apply to ip. The ioctls to configure firewalling are documented in ipfw(7) from the ipchains package. Ioctls to configure generic device parameters are described in netdevice(7) .


Be very careful with the SO_BROADCAST option - it is not privileged in Linux. It is easy to overload the network with careless broadcasts. For new application protocols it is better to use a multicast group instead of broadcasting. Broadcasting is discouraged. Some other BSD sockets implementations provide IP_RCVDSTADDR and IP_RECVIF socket options to get the destination address and the inter- face of received datagrams. Linux has the more general IP_PKTINFO for the same task.


ENOTCONN The operation is only defined on a connected socket, but the socket wasn't connected. EINVAL Invalid argument passed. For send operations this can be caused by sending to a blackhole route. EMSGSIZE Datagram is bigger than an MTU on the path and it cannot be fragmented. EACCES The user tried to execute an operation without the necessary permissions. These include: Sending a packet to a broadcast address without having the SO_BROADCAST flag set. Sending a packet via a prohibit route. Modifying firewall settings with- out CAP_NET_ADMIN or effective user id 0. Binding to a reserved port without the CAP_NET_BIND_SERVICE capacibility or effective user id 0. EADDRINUSE Tried to bind to an address already in use. ENOPROTOOPT and EOPNOTSUPP Invalid socket option passed. EPERM User doesn't have permission to set high priority, change con- figuration, or send signals to the requested process or group, EADDRNOTAVAIL A non-existent interface was requested or the requested source address was not local. EAGAIN Operation on a non-blocking socket would block. ESOCKTNOSUPPORT The socket is not configured or an unknown socket type was requested. EISCONN connect(2) was called on an already connected socket. EALREADY An connection operation on a non-blocking socket is already in progress. ECONNABORTED A connection was closed during an accept(2). EPIPE The connection was unexpectedly closed or shut down by the other end. ENOENT SIOCGSTAMP was called on a socket where no packet arrived. EHOSTUNREACH No valid routing table entry matches the destination address. This error can be caused by a ICMP message from a remote router or for the local routing table. ENODEV Network device not available or not capable of sending IP. ENOPKG A kernel subsystem was not configured. ENOBUFS, ENOMEM Not enough free memory. This often means that the memory allo- cation is limited by the socket buffer limits, not by the system memory, but this is not 100% consistent. Other errors may be generated by the overlaying protocols; see tcp(7), raw(7), udp(7) and socket(7).


IP_PKTINFO, IP_MTU, IP_PMTU_DISCOVER, IP_PKTINFO, IP_RECVERR and IP_ROUTER_ALERT are new options in Linux 2.2. They are also all Linux specific and should not be used in programs intended to be portable. struct ip_mreqn is new in Linux 2.2. Linux 2.0 only supported ip_mreq. The sysctls were introduced with Linux 2.2.


For compatibility with Linux 2.0, the obsolete socket(PF_INET, SOCK_RAW, protocol) syntax is still supported to open a packet(7) socket. This is deprecated and should be replaced by socket(PF_PACKET, SOCK_RAW, protocol) instead. The main difference is the new sockaddr_ll address structure for generic link layer information instead of the old sockaddr_pkt.


There are too many inconsistent error values. The ioctls to configure IP-specific interface options and ARP tables are not described. Some versions of glibc forget to declare in_pktinfo. Workaround cur- rently is to copy it into your program from this man page. Receiving the original destination address with MSG_ERRQUEUE in msg_name by recvmsg(2) does not work in some 2.2 kernels.


This man page was written by Andi Kleen.


sendmsg(2), recvmsg(2), socket(7), netlink(7), tcp(7), udp(7), raw(7), ipfw(7) RFC791 for the original IP specification. RFC1122 for the IPv4 host requirements. RFC1812 for the IPv4 router requirements. Linux Man Page 2001-06-19 IP(7)